*FEATURES
‧ Measuring AC, DC voltage / AC, DC current / potentiometer / resistor / PT-100 / load cell
‧ Max. hold / data hold / reset and 2 display value
selectable
‧ 0.56” high brightness LED display
‧ High stability, non-flammable case (PC), high safety
‧ CE approval
*SPECIFICATIONS
Display：
5 digits LED display (-19999~+99999)
Size－0.56"(14.22mm)
Input Range：
Voltage－0~50mV, 0~5V, 1~5V, 0~10V, 0~36V, 0~300V, 0~600V
Current－0~20uA, 0~200uA, 0~2mA, 0~20mA,
0~200mA, 4~20mA, 0~2A, 0~5A, 0~10A
3-wire Potentiometer－500Ω~10KΩ, 10KΩ~100KΩ, 100KΩ~1MΩ
2-wire Resistor－0~10Ω, 0~100Ω, 0~1KΩ, 0~10KΩ, 0~100KΩ
RTD (PT-100)－ -50~50℃, -100~100℃, -200~200℃, 0~600℃
Load cell－1mV/V Ex.5V, 2mV/V Ex.5V, 3mV/V Ex.5V, 1mV/V Ex.10V,
2mV/V Ex.10V, 3mV/V Ex.10V
(other input ranges are available upon request)
Accuracy：
±0.1%F.S. ±1 digit (DC/Potentiometer/Resistor/PT-100/Load Cell)
±0.2%F.S. ±1 digit (AC)
Sampling Cycle：16 cycles/sec (AVG=1)
Over Range Indication：doFL / ioFL or –doFL / -ioFL
Polarity Indication：Automatic with "-" indication
Parameters Setting：Push buttons
Back Up Memory：EEPROM
Temperature Coefficient：100 ppm/°C (0°C~60°C)
Temperature：Operating 0°C～+60°C；Storage -10°C～+70°C
Humidity：Both operating and storage 20%~90% RH (non-condensing)
Power Supply：AC 110/220V ± 10%
Power Consumption：4.5VA
Surge Test：2KVac / 1 min (input / power)
Input Impedance：
Voltage－ ＞2V for 20kΩ/V；≦2V for 200MΩ
Current－ ≧0.2A at 100mV；＜0.2A at 1V
