Digital LED Pressure Controller for Injection Machine
DPS-P/I series
*FEATURES
‧ 4-digit LED display, providing high definition
and no apparent value errors.
‧ STC single chip microcomputer provided with software engineering of strong functions, making the
Instrument with multiple functions and intellectual functions.
‧ Switching function of normally open/closed in output form, which enables the users to set any output form normally open or normally closed as required.
‧ Four pressure control working modes of constant pressure mode, pressure compensation mode I,
pressure compensation mode II and normal mode for users to select as required and to optimize
electric apparatus structure of the equipment.
*SPECIFICATIONS
Case：
Size－Φ100mm x 45mm；Φ150mm x 45mm
Material－Stainless steel
Display：4 digits LED display
Unit Selection：MPa, kg/cm2, psi, bar
Pressure Range：See pressure range selectable table
Pressure Proof：250% of full range (120% Overrating capacity can be showed on the display )
Accuracy：±1.6% F.S.
Measured media：Gas, Oil, Liquid compatible with brass
Sampling Rate：Per 30 ms (Selectable range of 0-199 ms)
Mounting Type：
Type P：Direct mounting－Bottom connection without flange
Type I：Flush panel mounting－Centric back connection with front flange
Connection：
Material－Brass
M20×1.5；M16×1.5；M14×1.5；G1/8；G3/8；G1/4；G1/2 (Other sizes are available upon request)
Power Supply：DC 24V ±10%
Output Signal：
Points－2~4
Voltage－-24/+24 V
Power－25W
Operating Temperature：0~+70℃
Working Humidity：35～80% RH
