5-Digit Micro-Process Meter with 2~4 Alarms / Analog Output / RS-485

ATM-DC5H-A series

5-Digit Micro-Process Meter

with 2~4 Alarms / Analog Output / RS-485

ATM-DC5H-A series

*FEATURES
‧ Measuring AC, DC voltage / AC, DC current / potentiometer / resistor / PT-100 / load cell
‧ Display range programmable
‧ Max. hold / data hold / reset and 2~4 alarms (Hi or Lo) programmable / analog output (15 bit resolution / RS-485 communication optional (the above options can exist together)
‧ 0.8” high brightness LED display
‧ High stability, non-flammable case (PC), high safety
‧ CE approval

*SPECIFICATIONS
Display 5 digits LED display (-19999~+99999)
Size－0.8"(20.3mm)

Input Range：
Voltage－ 0~50mV, 0~5V, 1~5V, 0~10V, 0~36V, 0~300V, 0~600V
Current－ 0~20uA, 0~200uA, 0~2mA, 0~20mA, 0~200mA, 4~20mA, 0~2A, 0~5A, 0~10A
3-wire Potentiometer－ 500Ω~10KΩ, 10KΩ~100KΩ, 100KΩ~1MΩ
2-wire Resistor－ 0~10Ω, 0~100Ω, 0~1KΩ, 0~10KΩ, 0~100KΩ
RTD (PT-100)－ -50~50℃, -100~100℃, -200~200℃, 0~600℃
Load cell－ 1mV/V Ex.5V, 2mV/V Ex.5V, 3mV/V Ex.5V, 1mV/V Ex.10V, 2mV/V Ex.10V, 3mV/V Ex.10V (other input ranges are available upon request)

Accuracy：±0.1%F.S. ±1 digit (DC/Potentiometer/Resistor/PT-100/Load Cell)
±0.2%F.S. ±1 digit (AC)

Sampling Cycle：16 cycles/sec (AVG=1)

Over Range Indication：doFL / ioFL or –doFL / -ioFL

Polarity Indication：Automatic with "-" indication

Parameters Setting：Push buttons

Back Up Memory：EEPROM

Alarm Action："≧(Hi) on" or "＜(Lo) on"

Alarm Hysteresis Range：0~9999

Alarm Run Delay Time：0~99 sec.

Relay Contact：AC 277V / 7A；DC 30V / 7A

Analog Output Resolution：15 bit

Output Response Time：<250 msec (0~90%)

Output Capability：
Voltage Output－ <20mA
Current Output－ <10V

Communication：RS-485 Modbus RTU mode

Baud Rate：38400 / 19200 / 9600 / 4800 bps

Parity Check：n.8.2. / n.8.1. / odd / even

Temperature Coefficient：100 ppm/°C (0°C~60°C)

Temperature：Operating 0°C～+60°C；Storage -10°C～+70°C

Humidity：Both operating and storage 20%~90% RH (non-condensing)

Power Supply：AC/DC 100~240V；DC 22~60V

Power Consumption：8.5VA (All functions output)

Surge Test：2KVac/ 1min (Input / Power)

Input Impedance：
Voltage－＞2V for 20kΩ/V；≦2V for 200MΩ
Current－ ≧0.2A at 100mV；＜0.2A at 1V

5-Digit Micro-Process Meter with 2~4 Alarms / Analog Output / RS-485

Welcome to Taiwantrade.com